V Cut Groove PCB Separating Cutter
1. Traveling Blade PCB Separator:
- “The traveling blade PCB separator is an electric machine that utilizes an upper circular blade and a lower straight blade to separate PCB boards and aluminum substrates. During separation, the PCB is secured to the lower blade via a V-groove, and the upper blade’s operation is controlled by a foot pedal switch.”
2. Motor Drive:
- “The equipment is driven by a stepper motor, capable of separating various large or small PCB boards with pre-scored grooves.”
3. Standard Separation Length:
- “The standard separation length is a maximum of 400mm. Sizes exceeding this range can be accommodated through customization.”
4. Upper Circular Blade Travel:
- “The travel distance of the upper circular blade (i.e., the separation length) can be pre-set, with settings available between any two values within the range of 0, 100, 200, 300, and 400mm. (A 600mm model is also available.)”
5. Traveling Blade Speed:
- “The traveling speed can be freely switched between 300mm/S and 500mm/S.”
6. Blade Gap Adjustment:
- “The gap between the upper and lower blades can be easily adjusted using a handwheel.”
7. Operational Safety:
- “Operation is safe, with a blade guard on the circular blade to prevent hand injuries.”
8. Blade Material:
- “The upper circular blade and lower straight blade are made of imported SKD-11 material, which is hard, wear-resistant, and has a long service life. The separation stress is minimal, preventing solder joint cracking.”
9. Separable PCB Thickness:
- “Separable PCB thickness: 0.5mm-3.2mm.”
10. Remaining PCB Thickness at V-Groove:
- “Remaining PCB thickness at the V-groove: standard 1/3 PCB thickness, MIN 0.2mm, MAX 0.8mm.”
11. V-Groove and Dimensional Changes:
- “Minimum V-groove depth: 0.25mm. Increase in external dimensions after separation: 0.1mm-0.2mm.”
